(REMOVE $H FROM CODE IF USING "LEADING EDGE INDUSTRIAL LEAD CONTROLER")
$H
%
(Leading Edge Industrial HX710 Turning Center Start Up Program - Copyright Leading Edge Industrial, 2018)
(Program Runtime: 8 Minutes)
(You may edit both the Spindle RPM "S" and the Machine Feedrate IPM "F" values to suit your individual needs)


(***********************************************************************************************************************)
(WARNING: PRIOR TO RUNNING THE BREAK-IN PROGRAM, REMOVE ANY MATERIAL FROM THE LATHE CHUCK)
(WARNING: PRIOR TO RUNNING THE BREAK-IN PROGRAM, REMOVE ANY TOOLS FROM THE TOOL POST)
(WARNING: PRIOR TO RUNNING THE BREAK-IN PROGRAM, REMOVE ANY CENTER OR CHUCK FROM THE TAIL STOCK)
(WARNING: PRIOR TO RUNNING THE BREAK-IN PROGRAM, MOVE THE TAIL STOCK TO THE FAR-RIGHT END OF THE MACHINE BED)
(***********************************************************************************************************************)

(Program Start)
(Incremental Mode)
G91
(Begin from machine home position)
G53
(Turn Spindle On; "S00", where "S" denotes spindle; "400" denotes RPM)
M3 S400
(Stage 1 - Cycle 1 F15; Where "F" denotes feedrate; "15" denotes IPM)
G01 X-1.5 Z-6.25 F15.
G01 X1.5 Z6.25 F15.
(Stage 1 - Cycle 2 - F15)
G01 X-1.5 Z-6.25 F15.
G01 X1.5 Z6.25 F15.
(800 RPM - Feedrate 30 IPM)
M3 S800
(Stage 2 - Cycle 1 - F30)
G01 X-1.5 Z-6.25 F30.
G01 X1.5 Z6.25 F30.
(Stage 2 - Cycle 2 - F30)
G01 X-1.5 Z-6.25 F30.
G01 X1.5 Z6.25 F30.
(Stage 2 - Cycle 3 - F30)
G01 X-1.5 Z-6.25 F30.
G01 X1.5 Z6.25 F30.
(1200 RPM - Feedrate 53 IPM)
M3 S1200
(Stage 3 - Cycle 1 - F53)
G01 X-1.5 Z-6.25 F53.
G01 X1.5 Z6.25 F53.
(Stage 3 - Cycle 2 - F53)
G01 X-1.5 Z-6.25 F53.
G01 X1.5 Z6.25 F53.
(Stage 3 - Cycle 3 - F53)
G01 X-1.5 Z-6.25 F53.
G01 X1.5 Z6.25 F53.
(Stage 3 - Cycle 4 - F53)
G01 X-1.5 Z-6.25 F53.
G01 X1.5 Z6.25 F53.
(Stage 3 - Cycle 5 - F53)
G01 X-1.5 Z-6.25 F53.
G01 X1.5 Z6.25 F53.
(1600 RPM - Feedrate 75 IPM)
M3 S1600
(Stage 4 - Cycle 1 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(Stage 4 - Cycle 2 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(Stage 4 - Cycle 3 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(Stage 4 - Cycle 4 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(Stage 4 - Cycle 5 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(Stage 4 - Cycle 6 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(Stage 4 - Cycle 7 - F75)
G01 X-1.5 Z-6.25 F75.
G01 X1.5 Z6.25 F75.
(2000 RPM - Feedrate 90 IPM)
M3 S2000
(Stage 5 - Cycle 1 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 2 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 3 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 4 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 5 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 6 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 7 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 8 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
(Stage 5 - Cycle 9 - F90)
G01 X-1.5 Z-6.25 F90.
G01 X1.5 Z6.25 F90.
M30
(Program End)
%
$H